Auch Konsolen-Hasser wie ich, müssen anerkennen, dass manche Dinge eben per Kommandozeile einfacher zu erledigen sind. Als herausragendes Beispiel kann man das Verarbeiten von Logs nennen. Wie sonst sollte man vernünftig Apache Log Files vera…

This plugin doesn’t have anything to do with how photos react when you click them, that is handled by another plugin you have installed.

Sorry.

-Paul

Thanks in advance. Good plugin.

If I want to use $this->module in my index.phtml, what Should I need to place in Bootstrap.php file.

I will explain:

If you use this print_r($this->_getAllParams()); in any of your controllers, suppose contactController;

it will display
Array (
[controller] => contact
[action] => index
[module] => default
)

instead of using that function (getAllParams()), I just want to initialize the controller, module, action values in bootstrap itself, so that I can use the values anywhere (controller / view) like $this->view->module in controller and $this->module in my views.

Please let me know how can we achieve this.

Thanks in Advance.
PixelMaker.

*seltsam* Mein root bei Hetzner hat das gleiche Problem. Am 09.12.09 wurde SDB zum ersten mal getauscht. Gestern, 07.03.10 meldet sich wieder mein mdadm wg. defekter Platte. Wieder SDB…
Nun ja, jetzt tauscht Hetzner nochmal. Hoffe das war das letzte mal in diesem Jahr :-)

If I have the autothumb generator and the NextGen gallery sidebar widget – where do I place the image width and height parameters. It says I have to go into my html? But if it’s a sidebar??? I guess I can add the image parameters to the sidebar.php file under a div or something?

In Internet Explorer there is no space between the two images, they are directly on top of each other.

I put the following code in the .css file of the theme I am using, but it still didn’t make a difference, using one or all of these.


#nextgen-gallery-sidebar-widget {
clear: left;
}

.ngg_sidebar_gallery_widget a {
display: block;
float: left;
margin: 0 5px 5px 0;
}


In Firefox however there is a space between the two images, even without adding the code.

So I am still baffled!

What I first did was restricting access to port 8000 just to the local IP via iptables. This should look somehow like this:

iptables -A INPUT -s 127.0.0.1/32 -p tcp -m tcp --dport 8000 -j ACCEPT
iptables -A INPUT -p tcp -m tcp --dport 8000 -j REJECT --reject-with icmp-port-unreachable

Then, I created an extra DNS entry for a subdomain which handles the JMX console and modified my Apache config. I’m using GnuTLS for SSL-based virtual hosts here, but just letting it run without SSL should work fine too. With this config, the frontend is reachable via cruisecontrol.example.org and the console via jmx.cruisecontrol.example.org, both using the same authentication backend. The frontend vhost takes care of rewriting all requests to the JMX domain with some more output filter magic. Should more or less work copy&paste, just take care of the URLs in the output filters. My final config looks something like this:

<VirtualHost *:80>
        ServerName cruisecontrol.example.org
        RewriteEngine on
        RewriteRule ^(.*)$ https://cruisecontrol.example.org$1 [R=301,L]
</VirtualHost>
<VirtualHost *:443>
    ServerName cruisecontrol.example.org

    [...SSL Stuff...]

    ProxyRequests Off  

    <Proxy *>
        Order deny,allow
        Allow from all

        AuthName        "CruiseControl"
        AuthType        Basic
        AuthUserFile    /etc/apache2/cruisecontrol.htpasswd
        require         valid-user
    </Proxy>  

    ProxyPass / http://127.0.0.1:8080/cruisecontrol/
    ProxyPassReverse / http://127.0.0.1:8080/cruisecontrol/

    ExtFilterDefine proxyurl mode=output intype=text/html cmd="/bin/sed s%http://127.0.0.1:8080%https://cruisecontrol.example.org%g"
    ExtFilterDefine proxypathfix mode=output intype=text/html cmd="/bin/sed s%/cruisecontrol/%/%g"
    ExtFilterDefine jmxurl mode=output intype=text/html cmd="/bin/sed s%http://cruisecontrol.example.org:8000%https://jmx.cruisecontrol.example.org%g"
    ExtFilterDefine ipfix mode=output intype=text/html cmd="/bin/sed s%127.0.0.1%cruisecontrol.example.org%g"

    SetOutputFilter proxyurl;proxypathfix;jmxurl;ipfix
</VirtualHost>

<VirtualHost *:80>
        ServerName jmx.cruisecontrol.example.org
        RewriteEngine on
        RewriteRule ^(.*)$ https://jmx.cruisecontrol.example.org$1 [R=301,L]
</VirtualHost>
<VirtualHost *:443>
    ServerName jmx.cruisecontrol.example.org

    [...SSL Stuff...]

    ProxyRequests Off  

    <Proxy *>
        Order deny,allow
        Allow from all

        AuthName        "CruiseControl"
        AuthType        Basic
        AuthUserFile    /etc/apache2/cruisecontrol.htpasswd
        require         valid-user
    </Proxy>  

    ProxyPass / http://127.0.0.1:8000/
    ProxyPassReverse / http://127.0.0.1:8000/
</VirtualHost>

Regards,
Mathias

Thanks so much for taking the time on this post!

I get:
Fatal error: Class ‘ControllerTestCase’ not found in C:\Program Files (x86)\Zend\Apache2\htdocs\ekorki\tests\application\controllers\IndexControllerTest.php on line 3

Could you help me?

NameVirtualHost *:80

ServerAdmin webmaster@localhost
DocumentRoot C:/xampp/htdocs
ServerName localhost

Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all

ServerAdmin webmaster@localhost
DocumentRoot C:/xampp/htdocs/mycharity/dev/
ServerName mycharity.dev

Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all

ServerAdmin webmaster@localhost
DocumentRoot C:/xampp/htdocs/myClub/dev/web_root/
ServerName myclub.dev

Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all

My hosts file is also valid at ‘C:\Windows\System32\Drivers\etc\hosts’.

127.0.0.1 localhost
127.0.0.1 mycharity.dev
127.0.0.1 myclub.dev

Any help is greatly appreciated.

/Paul

Half way down page I am getting an error message related to file path..Advice much appreciated.

Here is the path I am getting …I contact webhost and they told me to modify path in post area which is not ideal..There must be a way to modify plugin files to make this work?

Half way down page I am getting an error message related to file path..Advice much appreciated.

Here is the path I am getting …I contact webhost and they told me to modify path in post area which is not ideal..There muct be a way to modify plugin files to make this work?

I’m a newbie, but How it works?

I installed the plugin, enter the password, and…?

http://www.ultragraphik.com/histoirecourte/

As you can see, no “avatar”, it don’t works..

The 2 or 3 thumbails you can see on the site, are host on my serveur ( the custom fields: Image),
But, I thougt it possible to make a thumb from the first pic on my page, even if the image was an external image, hosted by amazon.com, in my example..

Help!!

But one question I have is that you put a lot more in application.ini than I’ve seen in other zend implementations. What are the reasons for putting stuff here rather than in bootstrap.php or index.php?

Cheers

I added a border around my large pictures…..and for the life of me I can not find where I did that. Could you tell me where I can change the border thickness for the pictures.

Thanks and sorry for the dumb question:(

Nice plug-in thank you for your hard work!!

Recently, I found a problem when I try to use postfix as an smtp server in the same server.

Say, there are some email accounts below I am handling in this server:
andy@gmail.com
peter@gmail.com
mary@gmail.com

When I send email to andy@gmail.com via the smtp server in the same server, the email can reach immediately without going to gmail official server.

That’s great with this kind of instand action.

However, when I send email, via the smtp server, to other account other than the account i manage in this server, say watermelon@gmail.com, I got an error message something like:
“User unknown in virtual mailbox table.”

If I send to watermelon@hotmail.com, there is no problem.

In my understand, after the setting, my server treat “gmail.com” is my own domain. For all the email sending via my server to gmail.com, it will directly deliver to the user in my server.

This make me headache.
At this moment, I am not able to send email via my server to any other friends’ gmail account.

Are there any way to solve this problem?

quick question, i have been looking for a solution to this for a while, so thanks a lot for th eplug in and for all the updates.

I have a question. i have already installed next gen gallery and also installed your plugin. it all works fine.

my problem is: when the thumbnails show on the side bar the link to a page. the so called gallery page.

here is the question: is there a way that when creating the gallery page, this page wont show on the navigation bar automatically?

thanks for your help.
Jose